hasemdi.blogg.se - How to create a gparted live usb

#How to create a gparted live usb install#
#How to create a gparted live usb manual#
#How to create a gparted live usb windows 10#
#How to create a gparted live usb windows 8#
#How to create a gparted live usb free#

I thought I bricked the flash drive, so I then formatted it and tried again, only to still see those errors. I didn’t format the flash drive on my first try, and saw a bunch of weird errors when trying to mount it in the Files GUI after running dd. NoteĬreating the live USB actually didn’t go quite as smoothly for me as described above. Make sure you have not made any typos when specifying the device.Īt this point, you should have a valid live USB containing GParted.

#How to create a gparted live usb install#

Replace /dev/sdb with the actual device you want to install GParted on.īe very careful with this step, as the dd utility could easily overwrite the wrong partition and brick your computer.

Replace ~/Downloads/gparted-live-0.24.0-2-amd64.iso with the actual path to the GParted image.

Run sudo dd if= ~/Downloads/gparted-live-0.24.0-2-amd64.iso of= /dev/sdb bs=4M sync to create the live USB.

Note that it is NOT /dev/sbd1, since that is just a particular partition, whereas we will need the entire disk. In my case, this was lots of lines containing /dev/sdb. Assuming you haven’t plugged in or unplugged any devices other than the flash drive in the previous steps, you should see a bunch of stuff related to the flash drive. This will erase all contents of the flash drive, so make there you haven’t left anything important on there. You should select FAT as the file system. I also did this via the Files GUI, by right clicking on the flash drive and clicking Format. Again, replace sdb1 to match your specific case. I did this via Ubuntu’s “Files” GUI, although it can also be done through the command line via umount /dev/sbd1. Ubuntu automatically mounted the flash drive as a storage device, so it was a good idea to unmount it before beginning. In my case, it was /dev/sdb1, but this will likely differ for you, so make sure to note the correct device for your specific case.

Plug in the flash drive and run df -h again.

With the USB flash drive NOT plugged in, open up a terminal and run df -h to see what devices are currently mounted.

#How to create a gparted live usb manual#

GNU/Linux Method D: Manual - Overwrite seemed to me to be the easiest method, so I went with a variation of that, as follows: Ultimately, I went with the amd64 architecture, and it worked for me on the first try. Although my computer has an Intel i7-3537U processor, the accompanying description of the amd64 (64-bit, newer computer with UEFI instead of legacy BIOS) seemed to match my situation better than the i586 (32-bit, but “if in doubt, try this one first”) or the i686-PAE. GParted Live comes in three different architectures: Note that 1GB is far more than necessary to create the GParted image, so use a small spare flash drive like this. To do this, I did the following while running Ubuntu: A CD/DVD would also work, but my laptop doesn’t have a CD drive. Since you can’t resize the Ubuntu partition while it is running ( not true apparently, although I didn’t want to risk it), it was necessary to create a bootable USB stick to boot GParted and perform the resize from there.

#How to create a gparted live usb free#

GParted is “a free partition manager that enables you to resize, copy, and move partitions without data loss.” After googling around a bit, this seemed like the best option for resizing the Ubuntu partition. Step One: Create a bootable USB stick containing GParted I used a combination of command line and GUI utilities.

Expand the Ubuntu partition using GParted.

Create a bootable USB stick containing GParted, a partitioning utility.

On a high level, this process consisted of three steps: The obvious solution was to shrink the Windows partition and expand the Ubuntu partition. However, I’ve been using Ubuntu as my primary OS since then, and I’d been starting to want more disk space. At the time, I wasn’t sure if I would stick with Ubuntu, so I was conservative with how much disk space I allocated to the Ubuntu partition.

#How to create a gparted live usb windows 8#

Everywhere I read that LiveUSB should deactivate the partition, but it seems that he's still running or there is another problem which I don't see.About a year and a half ago, I installed Ubuntu on my laptop so I could dual boot with the original Windows 8 installation. I can move the unallocated space two rows down, but the lvm2 partition is unable to extend with the 100gb. The ext4 partition get's unlocked when I boot from LiveUSB. I cannot "deactivate" the partition in Gparted while booted from the LiveUSB, thus I cannot extend the partition. I noticed that I have got no PE size left for my partition, but is does say resizable.

Checked if the root partition is mounted.īelow is my vgdisplay: VG Name fedora_localhost-live.

#How to create a gparted live usb windows 10#

I am running dual boot fedora 31 on my Windows 10 device. I want to add 100gb unallocated space to my current /dev/nvme0n1p7 "fedora_localhost-live" 33gb partition. After hours of searching on the internet for answers, I still cannot unlock my root partition in GParted.